The crusher shaft bears the entire load of the machine, so good lubrication is of great importance to the service life of the bearing. It directly affects the service life and performance of the machine, so the injected lubricating oil should be clean and the seal should be good.
If the crusher bearing oil temperature rises, the machine should be stopped immediately to check and eliminate the cause. If a thumping sound is heard when the rotating gear wheel is running, the machine should be stopped immediately to check and eliminate it.
During the initial trial operation, several straight raw materials of about 2-4 meters in length should be selected within the processing range according to the different models of small, medium and large. Special hard colombia number data mixed wood and raw materials with excessively large diameter and excessively curved should be avoided for trial operation.
Factors to consider when purchasing a wood chipper are as follows.
Is the wood chipper double chamber water cooling? Because the wood chipper is a high-speed crushing equipment, it is easy to get hot after long-term use, which may damage the bearings and cause the wood chipper to stop. Therefore, water cooling is necessary for wood chippers. The double chamber water cooling wood chipper can not only greatly shorten the heating time to ensure long-term operation, but also protect the internal parts of the wood chipper from damage due to overheating of the machine.